|
|
|
|
Lego Sets
|
Aeroplane
Kits |
Wooden
Robot Kits
|
Solar
powered robots
|
|
|
Radio Control
Models |
|
Motors, Gears, Cogs, Pulleys, Axles, Wheels, Propellers
and
Link Strip Construction System Parts |
|
Metal
Construction Kit
A metal construction kit containing all the parts to build a tractor.
Not suitable for children under 3 years of age due to small
parts |
 |
| Supplied
complete with assembly instructions.
Order
code RK0710113 Only £3.95 |
|
| More
Metal Construction Kits - Click Here |
|
Clockwork motor
A simple wind up motor which provides an easy alternative to battery
power. The motor will easily drive a mechanical toy or buggy and
is a highly visual way to show how energy can be stored and applied.
Supplied with key.
Overall length 40mm, Casing width 10mm, Spindle length 53mm, Spindle
diameter 2mm.
Order
code RECM0170 £3.95
|
|
|
3V 12,200rpm Miniature DC Motor
A 3V miniature motor ideal for low voltage applications.
Operating voltage 1.5 to 4.5V DC
Applications include motorised toys, models, etc. Connection is
by means of 2.8mm fast-on connectors, or by soldering.Shaft diameter
2mm, shaft length 8mm, motor diameter 20.75mm with a recessed 16mm
section, motor main body length 21mm, 25mm including recess, 29mm
overall including bearing hubs.
Order
code REM370146 £1.10 |
|
|
3V 13,100 rpm Miniature DC Motor
A low-cost miniature DC motor with many applications including models,
robotics and educational demonstration equipment.
Operating voltage 1.5 to 4.5V DC. Two flat sides make the motor
ideal for mounting on a PCB. With solder tag termination. Shaft
diameter 2mm, shaft length 7mm, motor diameter 20mm, 15mm across
flat sides, motor main body length 25mm, 29mm including bearing
hubs.
Order
code REM370140 £1.12 |
|
| Do
you live outside the UK? Don't
forget to add carriage
costs to your order
|
|
3V 5,240 rpm Miniature DC Motor
A low-cost miniature motor offering a higher stall torque.
Applications include models, robotics, etc. Operating voltage 1.5
to 4.5V DC. With solder tag termination. Shaft diameter 2mm, shaft
length 9.56mm, motor diameter 24mm with a recessed 19mm section,
motor main body length 23.5mm, 27mm including recess, 31mm including
bearing hubs.
Order
code REM370142
£1.35 |
|
|
3V 8,000 rpm Miniature DC Motor
A high torque miniature DC motor for higher power requirements.
Operating voltage 1.5 to 6.0V DC. With solder tag termination. Shaft
diameter 2mm, shaft length 9.5mm, motor diameter 24mm, motor main
body length 30.5mm, 34.5mm including bearing hubs.
Order
code REM370144 £1.59 |
|
|
Self Adhesive Motor Mount
A push fit motor mount to suit our range of miniature motors. Supplied
with a separate collar/insert to be employed when used with flat
sided motors.
The base has self adhesive surface for easy mounting of the motor
as required. Base dimensions 11mm x 35mm with four optional mounting
holes, centres 19mm and 30mm apart. Overall height 3cm approx.
Colour may vary.
Order
code REG370360 £0.83 |
|
|
4mm
to 2mm Shaft Adapter
An axle shaft adapter which fits tightly into a 4mm hole and which
is a push fit onto a 2mm axle allowing a 2mm motor shaft to drive
gears and pulleys with a 4mm centre bore. The adapter length is
approximately 8mm and it has a flange to aid location in a 4mm bore
gear
Order
code REG370403 £0.32
|
|
|
5mm
to 2mm Shaft Adapter
An axle shaft adapter which fits tightly into a 5mm hole and which
is a push fit onto a 2mm axle allowing a 2mm motor shaft to drive
gears and pulleys with a 5mm centre bore. The adapter length is
approximately 20mm and it has a flange to aid location in a 5mm
bore gear. |
These
adapters are also a push fit into the 5mm holes of the link strip
and plate construction system described further down this page and
can be used for the non-permanent assembly of structures.
Order
code REG525068 £0.37
|
|
|
|
5mm
to 3mm Shaft Adapter
An axle shaft adapter which fits tightly into a 5mm hole and which
is a push fit onto a 3mm axle allowing a 3mm motor shaft to drive
gears and pulleys with a 5mm centre bore. The adapter length is
approximately 15mm overall and it has a flange to aid location in
a 5mm bore gear. |
These
adapters are also a push fit into the 5mm holes of the link strip
and plate construction system described further down this page and
can be used for the non-permanent assembly of structures.
Order
code REG525070 £0.35
|
|
|
10
Tooth 2mm Bore Gear
10 tooth miniature gears / cog wheels for use with our DC motors,
the bore size is slightly under 2mm which ensures a tight fit on
a 2mm diameter shaft. Gear diameter 12mm, thickness 6mm approximately.
Gear colours may vary.
Order
code REG37028010-2mm £0.37
|
|
|
12
Tooth 2mm Bore Gear
12 tooth miniature gears / cog wheels for use with our DC motors,
the bore size is slightly under 2mm which ensures a tight fit on
a 2mm diameter shaft. Gear diameter 14mm, thickness 6mm approximately.
Gear colours may vary.
Order
code REG37019012 £0.42
|
|
| Do
you live outside the UK? Don't forget to add
carriage costs to your order |
Semi-flexible
Plastic Link and Plate Construction System
|
|
|
5mm
to 2mm Shaft Adapter
An axle shaft adapter which fits tightly into a 5mm hole and which
is a push fit onto a 2mm axle allowing a 2mm motor shaft to drive
gears and pulleys with a 5mm centre bore. The adapter length is
approximately 20mm and it has a flange to aid location in a 5mm
bore gear. |
These
adapters are also a push fit into the 5mm holes of the link strip
and plate construction system described further down this page and
can be used for the non-permanent assembly of structures.
Order
code REG525068 £0.37
|
|
|
|
5mm
to 3mm Shaft Adapter
An axle shaft adapter which fits tightly into a 5mm hole and which
is a push fit onto a 3mm axle allowing a 3mm motor shaft to drive
gears and pulleys with a 5mm centre bore. The adapter length is
approximately 15mm overall and it has a flange to aid location in
a 5mm bore gear. |
These
adapters are also a push fit into the 5mm holes of the link strip
and plate construction system described further down this page and
can be used for the non-permanent assembly of structures.
Order
code REG525070 £0.35
|
|
| |
30cm
Link Strip
30cm 40 hole link strips allowing gears and pulleys to be mounted
with a high degree of accuracy and which can be used to provide
strong structures following engineering principles.
The strips are pre-drilled with 5mm holes and are made of a flexible
plastic which can be cut curved or permanently bent, and are great
for creating structures and frame work.
Dimensions 30cm (300mm) x 10mm wide x 5mm thick.
Order
code REG52501200 £0.76
|
|
|
15cm
Link Strip
15cm 20 hole link strips allowing gears and pulleys to be mounted
with a high degree of accuracy and which can be used to provide
strong structures following engineering principles.
The strips are pre-drilled with 5mm holes and are made of a flexible
plastic which can be cut curved or permanently bent, and are great
for creating structures and frame work.
|
Dimensions
15cm (150mm) x 10mm wide x 5mm thick.
Order
code REG52501201 £0.39
|
|
|
3cm
Link Strip
3 cm 4 hole link strips.
The strips are pre-drilled with 5mm holes.
|
Dimensions
3cm (30mm) x 10mm wide x 5mm thick.
Order
code REG52501202 £0.26
|
|
|
Link
Strip Angle Bracket
4.5 cm 5 + 5 hole right angle link strips.
The strips are pre-drilled with 5mm holes and are great for creating
structures and frame work.
|
Dimensions
4.5cm (45mm) x 10mm wide x 10mm deep x 2.5mm thick.
Order
code REG52501203 £0.32
|
|
|
Link
Strip Right Angle Triangle Bracket
Flat brackets in the form of a right angle triangle for use with
the link strip system.
The brackets are pre-drilled with 5mm holes and are great for creating
structures and frame work.
|
Dimensions
32mm x 32mm, chamfered at the corners of the hypotenuse to render
it 32mm also; 2.5mm thick.
Order
code REG525054 £0.33
|
|
|
Link
Strip 60 Degree Triangle Bracket
Flat brackets in the form of a 60' triangle for use with the link
strip system.
The brackets are pre-drilled with 5mm holes and are great for creating
structures and frame work.
|
Dimensions
33mm each side, chamfered at the corners; 2.5mm thick.
Order
code REG525052 £0.31
|
|
|
Slider
Plate
Circular slider plates approximately 5mm thick and 60mm in diameter,predrilled
with 27 5mm holes and two slider sections 5mm wide. One of
the holes in the plate is central. These plates lend themselves
to various uses including cranks and tension adjusters. |
| Order
code REG525078 £0.42
|
|
|
Bearing
Block
Rectangular bearing blocks, each block has three 5mm holes and measures
approximately 25mm x 10mm x 10mm.
|
| Order
code REG525074 £0.31
|
|
|
Bearing
Bracket
Bearing brackets, each bracket has four 5mm holes and measures approximately
25mm x 25mm. The main bracket is 5mm thick and the bearing
section is 10mm.
|
| Order
code REG525072 £0.30
|
|
|
T
Spindle Adapter
T adapters drilled through with one 5mm hole and with two round
5mm diameter arms which push fit into the
5mm holes in the other parts in this construction system series.
Dimensions approximately 15mm wide at
the centre hole, central barrel outer diameter 9.5mm, length 45mm.
|
| Order
code REG52501801 £0.36
|
|
|
T
Adapter
T adapters drilled through with three 5mm holes.
Dimensions approximately 15mm wide at
the centre hole, length 40mm.
|
| Order
code REG52501802 £0.39
|
|
|
Flat
T Barrel Adapter
T adapters drilled through with two 5mm holes.
Dimensions approximately 15mm wide along the barrel, diameter
10mm, T length 25mm. |
| Order
code REG52501803 £0.32
|
|
|
T
Barrel Adapter
T adapters drilled through with two 5mm holes.
Dimensions approximately 15mm wide along the barrel, diameter
10mm, T length 25mm. |
| Order
code REG52501804 £0.31
|
|
|
End
Adapter
End adapters drilled through with one 5mm hole and with a second
5mm hole drilled into the barrel section.
Dimensions approximately 27mm long overall, 10mm diameter at the
barrel. |
| Order
code REG52501805 £0.28
|
|
| Vous
habitez hors du Royaume Uni? N'oubliez-pas
d'ajouter des frais d'envoi
a votre commande
|
|
Multi Ratio Gearbox Kit
A multi ratio gearbox supplied in kit form which allows eight different
transmissions from 5:1 to 1125:1 to be achieved.
Included in the kit is a medium torque motor which will operate
from 1.5V to 4.5V DC. The output shaft is 3mm diameter.
The gearbox is easy to mount to any surface with the slots that
are provided in the gearbox mounting plates.
Supplied with full instructions on assembly and gearbox ratios.
This gearbox includes a much sought after 6mm diameter cog, 6mm
wide with 10 teeth.
Order
code REG371220 £8.45 |
|
|
Worm Drive Gearbox and Motor
A robust worm-drive gearbox powered by a miniature DC motor (included)
which is suitable for applications where an easy to fit, high torque
output is required
Ideal for student based projects including robots and buggies.
Motor operating voltage 3V to 6V
Motor speed 3V no load 9,700rpm, 6V no load 17,100rpm
Motor stall torque 122g-cm 220g-cm
Axle diameter 3mm
Fixing holes 4 x 4mm
Overall dimensions of box + motor 3.5cm x 4cm x 6cm
Order
code REG370310 £5.25 |
|
|
2 Blade Plastic Propeller
A 120mm diameter 2 blade plastic propeller which fits tightly on
to a 2mm spindle.
Order code REP060626 £0.95 |
|
|
3 Blade Plastic Propeller
A 130mm diameter 3 blade plastic propeller which fits tightly on
to a 2mm spindle.
Order code REP060628 £1.10 |
|
|
3 Blade Plastic Propeller with Twistable Blades
A 3 blade plastic propeller with twistable blades which can be bent
either way to produce a clockwise or anticlockwise airscrew.
The flexible nature of the plastic reduces the danger of injury
due to accidental contact with the blades. The propeller fits tightly
on to a 2mm spindle. 100mm diameter, central hub thickness 9mm.
Order code REP372206 £0.51 |
|
|
Model Wheels
Model wheels moulded in robust but soft ABS material providing a
flexible tyre, with 2.6mm diameter bores.
37mm diameter.
Order code REG371310 £0.98 |
|
|
Polythene Wheels
39mm diameter polythene wheels ideal for heavier duty modelling
applications, with a 3mm interference fit centre hole. Wheel rim
thickness 7mm, 9mm total including hub.
Colours may vary.
Order
code REG372228 £0.22 |
|
|
Smooth Rubber Track
Smooth rubber track in 1 metre lengths supplied for use as drive
belt or track material.
Approximate width 2.7cm.
Order
code REG060648 £3.95 |
|
|
Caterpillar Track
Durable soft track with a transverse tread ideal for robots and
buggies.
The track is approximately 3cm wide and 18cm long.
Order
code REG372550 £1.95 |
|
A range of pulleys with a 2mm central bore which are a push fit
on 2mm axle shafts and on our DC motors, above.
|
|
Elasticated Pulley Belt Cord 1 Metre
One metre lengths of elasticated cord for pulleys.
Order
code REG525082 £0.95 |
|
|
7.5mm Pulley
Deep 'V' groove pulleys manufactured in high impact polystyrene
with motor spindle stand-off, with a 2mm bore, approximately 7.5mm
overall in diameter, overall length 10mm.
Order
code REG370370 £0.45 |
|
|
10mm Pulley
Deep 'V' groove pulleys manufactured in high impact polystyrene
with motor spindle stand-off, with a 2mm bore, approximately 10mm
overall in diameter, overall length 10.5mm.
Order
code REG370342 £0.47 |
|
|
12.5mm Pulley
Deep 'V' groove pulleys manufactured in high impact polystyrene
with motor spindle stand-off, with a 2mm bore, approximately 12.5mm
overall in diameter, overall length 9.5mm.
Order
code REG370375 £0.51 |
|
|
25mm Pulley
Deep 'V' groove pulleys manufactured in high impact polystyrene
with motor spindle stand-off, with a 2mm bore, approximately 25mm
overall in diameter, overall length 9.5mm.
Order
code REG370380 £0.55 |
|
| Do
you live outside the UK? Don't forget to add
carriage costs to your order |
|
2mm
Miniature Steel Axle Shafts
Steel axle shafts for use with miniature gears, wheels, motors,
etc. 2mm diameter, 75mm long, the axles can easily be cut with a
hacksaw.
These axles are suitable for use with the WHITE plastic gears
below.
Order code REG370350 £0.08 |
|
|
3mm
Miniature Steel Axle Shafts
Steel axle shafts for use with miniature gears, wheels, motors,
etc. 3mm diameter, 75mm long, the axles can easily be cut with a
hacksaw.
Order code REG370352 £0.12 |
|
The above 2mm axles are the correct diameter for use with the
white worms and gears listed below.
The tooth spacings within the range of WHITE worms and gears listed
below match the other WHITE gears listed.
|
|
Miniature
Worm Gears
Miniature worm gears for use with our DC motors, the bore size is
1.9mm which ensures a tight fit on a 2mm diameter shaft. Length
10mm, outer diameter 6mm.
Order code REG370305 £0.15 |
|
|
Miniature
9mm Gears / Cog Wheels
Miniature gears / cog wheels for use with our DC motors, the bore
size is 1.9mm which ensures a tight fit on a 2mm diameter shaft.
Gear diameter 9mm, thickness 5mm.
Order
code REG370200 £0.06
|
|
|
Miniature
16mm Gears / Cog Wheels
Miniature gears / cog wheels for use with our DC motors, the bore
size is 1.9mm which ensures a tight fit on a 2mm diameter shaft.
Gear diameter 16mm, thickness 1.5mm, 4.5mm including central hub.
Order
code REG370205 £0.08
|
|
|
No picture
yet |
Miniature
16mm Double Gears / Cog Wheels
Miniature gears / cog wheels for use with our DC motors, the bore
size is 1.9mm which ensures a tight fit on a 2mm diameter shaft.
Outer gear diameter 16mm, inner 10 tooth gear diameter 6mm, thickness
1.5mm, 5.5mm including central hub.
Order
code REG370220 £0.11
|
|
|
Miniature
22mm Gears / Cog Wheels
Miniature gears / cog wheels for use with our DC motors, the bore
size is 1.9mm which ensures a tight fit on a 2mm diameter shaft.
Gear diameter 22mm, thickness 1.5mm, 5.5mm including central hub.
Order
code REG370210 £0.10
|
|
|
No picture
yet |
Miniature
22mm Double Gears / Cog Wheels
Miniature gears / cog wheels for use with our DC motors, the bore
size is 1.9mm which ensures a tight fit on a 2mm diameter shaft.
Outer gear diameter 22mm, inner 10 tooth gear diameter 6mm, thickness
1.5mm, 5.5mm including central hub.
Order
code REG370225 £0.14
|
|
|
No picture
yet |
Miniature
31mm Gears / Cog Wheels
Miniature gears / cog wheels for use with our DC motors, the bore
size is 1.9mm which ensures a tight fit on a 2mm diameter shaft.
Gear diameter 31mm, thickness 1.5mm, 4.5mm including central hub.
Order
code REG370215 £0.15
|
|
| Vous
habitez hors du Royaume Uni? N'oubliez-pas
d'ajouter des frais d'envoi
a votre commande
|
A range of gears and pulleys (except 12 tooth gear 37019012) with
a 3mm central bore.
The tooth pitch of these gears is the same as the pitch of the
GREEN 37028 series of gears and rack and black worm gear REG370240, and
they match, although the tooth profile is slightly different.
|
|
|
2mm
Miniature Steel Axle Shafts
Steel axle shafts for use with miniature gears, wheels, motors,
etc. 2mm diameter, 75mm long, the axles can easily be cut with a
hacksaw.
Order code REG370350 £0.08 |
|
|
|
12
Tooth 2mm Bore Gear
12 tooth miniature gears / cog wheels for use with our DC motors,
the bore size is slightly under 2mm which ensures a tight fit on
a 2mm diameter shaft. Gear diameter 14mm, thickness 6mm approximately.
The tooth pitch and profile matches the 3mm bore gears below.
Gear colours may vary.
Order
code REG37019012 £0.42
|
|
|
|
3mm
Miniature Steel Axle Shafts
Steel axle shafts for use with miniature gears, wheels, motors,
etc. 3mm diameter, 75mm long, the axles can easily be cut with a
hacksaw.
Order code REG370352 £0.12 |
|
|
20
Tooth 3mm Bore Gear
20 tooth miniature gears / cog wheels. The bore size is 3mm, gear
diameter 22mm, thickness 6mm approximately with a hub on one side,
overall thickness 12mm approximately.
The gear is a push fit on 3mm axle shafts.
Gear colours may vary.
Order
code REG37019020 £0.47
|
|
|
30
Tooth 3mm Bore Gear
30 tooth miniature gears / cog wheels. The bore size is 3mm, gear
diameter 32mm, thickness 6mm approximately with a hub on one side,
overall thickness 14mm approximately.
The gear is a push fit on 3mm axle shafts.
Gear colours may vary.
Order
code REG37019030 £0.56
|
|
|
40
Tooth 3mm Bore Gear
40 tooth miniature gears / cog wheels. The bore size is 3mm, gear
diameter 41mm, thickness 6mm approximately with a hub on one side,
overall thickness 14mm approximately.
The gear is a push fit on 3mm axle shafts.
Gear colours may vary.
Order
code REG37019040 £0.66
|
|
|
Link
Chain for 370190 and 370280 Series Gears
Metal link chain for use with the 370190 series of gears above.
Supplied in 50cm lengths approximately, the chain is approximately
1cm wide and the links can be opened and reclosed for length adjustment
and joining purposes.
Order
code REG060650 £7.45
|
|
| Do
you live outside the UK? Don't forget to add
carriage costs to your order |
|
3mm
Bore Peg Cam
A polythene peg cam with two pre-drilled holes which are a tight
push fit onto 3mm axle shafts.
Diameter 2.5cm, thickness 5mm approximately.
Colours may vary.
Order
code REG37018001 £0.46
|
|
|
|
Remtrak
