An third lens can be rotated into position over the right eye for even higher magnification. Two lights on either side (requires 4 x AAA batteries) provide workpiece lighting where necessary.

2 Metre Keyring Tape Measure
A handy two metre / 6 foot keyring tape measure with both imperial and metric markings.
Housed in a soft-touch case, the tape measure has a sliding thumb operated lock with automatic spring return.
The tape measure has a removable metal belt clip on the back of the tape meausre body.
Case dimensions approximately 5cm (1.96") x 4.5cm (1.77") x 2cm (0.78") thick, not including belt clip.

Precision Knife Set
A comprehensive cutting and carving set for all your hobby needs.
A 16-piece precision knife set comprising two miniature precision holders and a heavier duty holder with an ABS handle.
A total of 13 blades are supplied enabling the user to employ knives for a wide variety of cutting operations and the blades are retained on a magnetic holder in the lid of the hinged case.
Case dimensions 160 x 65 x 35mm.

51 Piece Hobby Knife Set
A comprehensive cutting and carving set for all your hobby needs.
With seven assorted handles, 42 assorted blades, a pocket sharpening stone and tube of glue, all contained in a hinged rigid plastic storage case.

Fluorescent Magnifier Table Lamp
A portable, compact self-standing mini lamp with a 12W daylight tube, powered from the UK 240V AC 50Hz mains.
Ideal for intricate work, the lamp has a high quality 100mm glass lens with built-in close up lens and uses an energy saving fluorescent tube which provides a shadow free light with no heat emission.
The lamp has an ergonomic design with adjustable table base and an On/Off switch on the lamp base.
Magnification 1.75x and 4x

Halogen Desk Lamp
A low voltage halogen desk lamp ingeniously designed so that it can be extended for use as a desk light, or retracted for use as a personal reading light.
Finished in a sleek metallic blue, the lamp has extending telescopic arms allowing the lamp to be continuously adjusted from a compact height of approximately 18.5cm for use as a personal reading lamp, to about 38cm (depending on the angle of the main telescopic arms), for use as a desk lamp.

6 Piece Precision Screwdriver Set
A six piece miniature screwdriver set with knurled grip, housed in a plastic case.

The set contains 1mm, 1.4mm, 2mm, 2.4mm, 3mm and 3.5mm screwdrivers.

16 Piece Precision Screwdriver, Cutter and Pliers Set
A comprehensive tool set in a quality zipped storage case and comprising 12 precision screwdrivers with rotating caps
and four carbon-steel cutters and pliers.
The precision screwdriver set contains four crosspoint screwdrivers Nos. 000, 00, 0 and 1, four slotted screwdrivers 1.6mm, 2mm, 2.4mm and 3mm and four torque screwdrivers T6, T8, T9 and T10.
The cutter and plier set contains 115mm long nose pliers, 150mm needle nose pliers, 115mm side cutters and 100mm end cutters.

Helping Hands
An indispensable tool for modellers, the unit holds small objects for you while you work on them.
Mounted on a heavy base, the unit comprises two crocodile clips for holding objects and a magnifying glass.
Eight ball and socket joints allow infinite variation through 360 degrees for accurate positioning.

Magnifying Lamp
A fluorescent magnifying lamp with a 120mm diameter lens and a 22W circular fluorescent tube which emits minimal heat and reduces eye strain.
The arm has a fully extended length of 92cm and is balanced enabling it to be moved easily without drifting from position. Supplied complete with table clamp.
Powered from the UK 230V AC mains supply.

Classic Magnifying Lamp
A classically styled fluorescent magnifying lamp with sealed mechanics. The lamp has two 12cm glass lenses providing 1.75X and 2.25X magnification and a 22W daylight tube which emits minimal heat and reduces eye strain. The arm is fully balanced and sealed enabling it to be moved easily without drifting from position. Supplied with table clamp.
Powered from the UK 230V AC mains supply.

Bench Clamp Mini Vice
A sturdy bench clamp vice finished in a hammered epoxy paint.
The jaws which are 60mm wide have been specially hardened, and have a capacity of 55mm.
The vice can be clamped to a bench or work surface.

Aluminium Hobby Vice
A lightweight and durable miniature vice made of die-cast aluminium construction ideal for hobbyists.
Jaw Width 60 mm, Jaw Opening 40 mm
Clamp Opening 27 mm, Weight 415 g

Folding magnifier
A versatile folding magnifier with 60mm diameter mineral glass lens.
Dioptre: 5x
Order Code C31103 £2.95

Gooseneck magnifying glass
A versatile magnifier complete with mounting bracket, ideal for hands free operation.
Dioptre: 3x
Arm length 510mm

18W Antex soldering iron for fine soldering work with 1.5 metres of cable and fitted UK 230V AC 13A mains plug.
Supplied fitted with a 2.3mm bit.
Order Code AX18W  £21.95

25W Antex soldering iron for heavier duty applications with 1.5 metres of cable and fitted UK mains plug.
Supplied fitted with a 2.3mm bit.
Order Code AX25W  £21.95

 A heavy duty soldering iron stand. The stand incorporates a heavy 700gm die cast base which acts as an extremely stable base for the iron. A heavy chrome plated steel spring contains a shield for the iron which serves to maintain tip temperature and protect users from accidental contact with the iron.

Replacement sponge for the stand.
Order Code PG588  £1.10  each

Pack of 10 glue sticks, natural colour, length 10cm.
Order Code RGS 3990 £2.80

Eclipse Junior Hacksaw
Order Code FHS442653 £8.95

Sturdy junior hacksaw with comfortable pistol grip
Blade tension is adjustable by a knurled nut with 60mm depth of cut. Overall length=255
Order Code FHS282431 £14.95